Everything Your Concrete Contractor Should Be Doing Before Paving Your Surface

Everything Your Concrete Contractor Should Be Doing Before Paving Your Surface

Concrete is a popular paving material for sidewalks, driveways, garden paths, and more. It’s cheap and durable and doesn’t require an extensive maintenance regime.

The only flaw is that the whole surface needs to be repaved if the concrete breaks from anywhere. Minor cracks, of course, can be filled.

Are you searching for a contractor who provides expert concrete paving solutions in Tampa, FL? Resource Pavement Group offers high-quality paving services to commercial and residential clients, so click here to get a free quote now.

Getting a concrete surface paved requires both you and your contractor to do some tasks for preparation. While your job is to select a design, pattern, and color, your contractor is busy too.

Below are all the things a contractor should do before start pouring any concrete onto the ground.

Preparing the area

Clear the area as best as you can. Sweep away any debris, trash, and organic matter like dead leaves, twigs, seedpods, etc. Shovel away any snow. And leave the ground to dry after rainfall or snowfall. A wet surface won’t allow the creation of a strong concrete surface as the concrete mixture won’t stick to the ground properly.

Defining the space

Calculate what area you will be paving on. Double-check the dimensions and measurements. And once you know what space you need to work with, start prepping as per the choice of material.

If you have to build a concrete slab, then put up walls to make a boundary for the poured concrete. However, if you are getting pavers installed, then dig the area a few inches deep.

Creating a drainage system

It is vital to identify how your drainage would work and if you need to set up a system before laying your concrete to avoid water buildup and damage during the rainy season. Work on it now, or you might have to repave the whole surface again soon.

Laying a base layer

Create a strong base layer with coarse, thickly crushed material to keep the concrete layer strong and intact. Lay out an 8-inch layer of crushed concrete or stone. Level the base layer before moving forward.

Reinforcing the foundation

Add rebar, wire mesh, or a composite or steel grid on top of the base layer to reinforce its shape. Metal supports like these will keep the concrete surface strong for decades.

Pouring the concrete

Once everything else is done, it is time to finally lay down the concrete and let it still there till it dries. Meanwhile, if you are creating a large slab, you can start leveling and stamping the concrete, so it holds its shape, leading to a smooth surface.

Finding the perfect paving company is a challenge in itself. There are so many contractors in the Tampa, FL market who offer to work at different rates. However, it would be best if you focused on finding a paver that offers the best service. Contact Resource Pavement Group, or click here to get a free quote now.